XPhase Pro S
XPhase Pro S 360° Camera 1024 557 dreihundertsechzig

XPhase Pro S 360° Camera

The Xphase Pro S is a 360° one-click camera, that can capture 200 MegaPixels in total (with a 16K output). It works with 3 or 6-shot HDR and it’s own file format “ORI”, where the single pictures from all 25 sensors (3/6 each) are saved. Stitching is easy and surprisingly good with their own software/app “PanoManager”. The possibilities with this nice tool seem endlessly, but the system is still in a early state. At the momet i cannot reccomend it for professional use and only to experienced users, who are willing to spend some time with it and can evaluate the up-/downsides.

As there are still smaller and some major issues with the hard- & software, please check the Facebook group for the actual status of development. I will add more information to this article, soon. For now, you’ll find some basic information below.

Where to buy?
Initial Set-Up & Begin Shooting with the XPhase Pro S (tbd)
Review, Samples, Workflow & Tutorial from 360 Rumors
Facebook Group/Board/Community (“XPhase / XPhase Pro Group“)
Firmware/Software & User Guides
Version History (last updated 2020/01/21)
Useful Accessories & Shooting Equipment (tbc)
My RAW Workflow (tbd)
Recommended 3rd Party Apps & Software (tbc)

Issues and Flaws (last updated 2020/01/09, tbc)
Technical Specs & Background Information on the XPhase Hard-/Software (tbc)
Virtual Tours/Panoramas Shot with XPhase Pro S (tbc)
Comparisons with other 360°/DSLR Cameras (tbc)

Resolution Comparison, Equirectangular 2:1, 16K | 12K | 8K | 5.7K | 4K

360° Panorama Photo Resolution Comparison, Equirectangular 2:1, 16K | 12K | 8K | 5.7K | 4K

Where to buy?
As it ships from China, there may apply some import tax and/or duties depending on the destination country.

Initial Set-Up & Begin Shooting with the XPhase Pro S
Please read the “Tips for Quick Start” and all manuals provided together with the hard-/software before starting.
Charge, update firmware, get the software/app ready, configure and shoot for the first time. You may consider to run PanoManager on Windows (in any folder/direction with write access, like root of harddrive) and a capable Android phone (at LEAST 2 GB of RAM, Android 5.1, good chipset and stable WiFi connection, ++).

Review, Samples, Workflow & Tutorial from 360 Rumors
“TOO GOOD to be true? XPhase Pro review Part 1”:

Find more videos on YouTube:
Find more samples (ORI, DNG, PNG, JPG, PNO, etc.) in the FB group.

Facebook Group/Board/Community (“XPhase / XPhase Pro Group”)

Firmware/Software & User Guides
Download for Windows and Android (not listed on Google Play Store):

You’ll find the iOS app in the Apple App Store, which is usually way behind the Win/Android versions (see FB group for more information).

Version History

January 21, 2020
Software and Firmware (200120 version)
1. Support level correction using a gyroscope
2. Add "-5EV~+2EV" (-5EV, -3EV, -1EV, 0EV, +1EV, +2EV) option to HDR6 mode
3. Support outputting real raw DNG for each camera (Need to use SanDisk U disk, using Toshiba U disk will make storage speed very slow)
4. Support GPS meta tagging
5. Add "BEST" option to jpeg quality (YUV444 and quality 95)
6. Reduce color unevenness
7. Improve gamma curve for jpg to reduce blow out
8. Improve stitching in low light
9. Fix a bug that ori file larger than 500M could not be stitched
10. Fix a bug that could not be deleted in batches on ios (ios will be updated soon)

December 18, 2019
Software and Firmware (191218 version)
1. Improved color processing: Reduces color unevenness in certain light and reduces glare
2. Changing or saving default settings
3. Provide visual confirmation of the shutter press and exposure complete
4. Allow the Panomanager app to be connected/reconnected to the camera without pressing the shutter button
5. Provide more option of dynamic range: from -2EV ~ +2EV to -3EV ~ +3EV
6. Add an option to stitch without HDR merging (e.g. only stitch -1EV)
7. Indication of used shooting options in the apps
8. Add an option to avoid streaks caused by stroboscopic light sources such as fluorescent or incandescent lamps (50 or 60 Hz)
9. Add XMP tags to DNG file

November 26, 2019
Firmware (1126 version)
This new version fixed color issues in low light conditions.

November 13, 2019
Software and Firmware (1113 version)
This new version fixed the DNG bug, adjusted the Gamma in JPG output, fixed color issue of dark area.

November 7, 2019
Software and Firmware (1107 version)
This new version fixed the bug of 1031version, optimized stitching algorithm, DNG has been disabled for now, will enable in next few days after fixing.

October 31, 2019
Software and Firmware (1031 version)
This newest version update Auto Mode 6shot HDR and DNG Raw output.

October 25, 2019
Software and Firmware (1025 version)
This new version comes with 6shot HDR.

September 27, 2019
Software (0927 version)
This new version fixed stitching errors and turned off the auto-stitching function.

August 28, 2019
Software and Firmware (0828 version)
This new version improves photo stitching, please make sure to update both the camera firmware and softwares.

All version information was posted by Danny Wong on the public XPhase Pro Facebook group (

Useful Accessories & Shooting Equipment

– USB WiFi repeater (recommended for much higher range, check for a cheap black one with foldable antennas)
– Power bank (to run the repeater or charge the XPhase between shooting, check the Feiyu Tech charging handle)
– Charging cables and spare parts (original bottom caps, cables and lens protective glasses can be purchased at stabilizer-pro)
– *Waterproof hardcase (approx. 35 x 29,5 x 15 cm). Fits XPhase, RAVPower AC750, Richer-R WLAN Repeater, many cables, YI 360 VR camera, remotes and adapters, USB sticks and micro sd cards, Zoom H2n Spatial Audio Recoder incl. windshield, Feyutech Handle Charger, Andoer Monopod Stand incl. 400 g SMALLRIG weights, Insta360 Invisible Selfie Stick, Insta360 Carbon Selfie Stick including Zhiyun Quick Setup Kits, Lenspen MiniPro III, a lot of stickers on the sides and of course some desiccant packs (moisture absorber) 😛
– “Extended Battery Pack“/power supply accessory: “Xphase Pro S camera extended battery, length: 245mm, width: 25mm, 6800mAh, continuous working time 3hours. (Camera standard built-in battery is 3400mAh, continuous working time 2hours)“. (coming soon)
– Monopods, poles, weights, stands, 360° lighting solutions, quick-release adapters, etc.:
tbc (you can check the FB group for great tips, meanwhile)

My RAW Workflow
Shooting tips for various scenarios, stitching to DNG, stacking/merging different 3/6HDR DNGs or even DNGs of single exposures with your own choice of software like Kandao RAW+ or Photomatix HDR, developing in Adobe Photoshop/Camera Raw or Lightroom, leveling/straightening if needed, final denoising/sharpening if needed, nadir patch, inject 360° EXIF information/XMP metadata if needed and other enhancements.
tbd (you can check the FB group for great tips, meanwhile)

Recommended 3rd Party Apps & Software
Android: edit360 (leveling), Tiny Planet FX Pro, Snapseed, TouchRetouch (nadir editing)
iOS: Please comment any recommendations here. It would add great value!
Windows: Hex Editor Pro (to unpack 6shot ORIs), Kandao RAW+, Photomatix Pro (HDR software), Exif Fixer, FAT32 Format, Adobe Photoshop (Camera Raw), GoPro VR Player
Virtual tour creation: Pano2VR Pro, 3DVista Virtual Tour Pro, kuula (web-based), Panotour Pro (discontinued)
tbc (you can check the FB group for great tips, meanwhile)

Issues and Flaws (last updated 2020/01/01)
– My unit gave up and stopped shooting (only 4 beeps), had to be replaced
No real RAW output (DNGs are generated from already “cutted” JPGs and are not set up perfectly)
– Dodged black and white points in the camera’s unstitched JPGs from each lens (not using full range of 255 values)
– Color shift from center to edges in the unstitched JPGs (vignetting causing “color blobs” on final panos)
– Issues with 3 and 6shot HDR bracketing
– ORI files larger than 500 MB cannot be stitched ATM
– Lagging when shooting several shots right after another (perhaps due to overheating SoCs – unconfirmed)
– Some shots in a row are not saved correctly (perhaps due to overheating or as Danny Wong says “USB connection to the drive got loose”)
– Hot pixels from right after starting the camera (even at 0° C) that ends in a “starry sky” all over the panorama) when shooting longer exposures (tested Manual Mode, ISO 100, 3.2 – 8 sec., 3HDR). According information of Danny Wong, this is an hardware “limitation”.
– Lenses fogging up from inside the camera what makes shooting impossible (Silica Gel packs inside the storage case can help to avoid this)
– Some reporting weak WiFi signal
– Bottom part with male screw is made from plastic (hygroscopic Nylon) and is a weak point to break
– Heavy lens flare on bright light sources (caused by the coating/filter of the lens glasses)
– The camera cannot be charged while mounted (3.5mm charging port is under the bottom cap)
– Built-in gyro not activated for stabilization/leveling, yet
– iOS/Mac software outdated/not available
tbd in more detail (you can check the FB group for more information, meanwhile)

Technical Specs & Background Information on the XPhase Hard-/Software
Sensors: OmniVision OV8865 Color CMOS 8 MP (3264×2448) Image Sensor with OmniBSI™-2 Technology, 1.4-micron, 30 fps, Automatic black level calibration (ABLC), Static defective pixel canceling, Supports output format 10-bit RAW RGB (MIPI), Supports horizontal and vertical sub-sampling
Chipset/SoC: HiSiliconHi3519 V100” with Cortex-A53s*
Interfaces: USB 2.0, WiFi 2.4 GHz
Battery: 3400 mAh, Li-Po
Power supply: DC 3.5 mm x 1.3 mm, 2 A
Optics/lenses: Lens glasses with coated “lens protective glass” (“The AR coating on the protection glass of Xphase Pro S lens is different from Ocam, but it nearly not affect the glare, the glare is mainly affected by the lens and IR filters.“). Lenses, (IR) filters and coatings not known.
Focal Length: 3.85 mm*
Horizontal Field of View (HVoV): 44.5° (FOV: 68°)*
Focal length multiplier: 7.6*
Sensor size: 1/3.2 inch / 4.54 x 3.42 mm (diagonal: 5.68)
Bracketing in 3HDR/6HDR mode: -2, 0, +2 / -3, -2, -1, 0, +1, +2 EV
Fastest shutter speeds: 1/15000 sec. (~1/3840 sec. = 0,00026s for middle shot)
*According to user findings

Virtual Tours/Panoramas Shot with XPhase Pro S
Vernissage/Exhibition “MUNICH POP ART” at köşk, Munich, Germany
Tollwood Winter Festival 2019, Munich
Grafitti Artworks & Mercedes Benz (Car Advent Calendar), Donnersbergerbrücke, Munich
Christmas Market 2019 on Munichs Marienplatz

Comparisons with other 360°/DSLR Cameras
One shot zoomed in comparison with Ricoh Theta Z1 by Jimmy Munro
One shot comparison with Xiaomi Mijia Mi Sphere, Kandao Qoocam 8K and insta360 One X by Fabian Ruyters
XPhase Pro Review: DSLR-level 360 camera for VIRTUAL TOUR (+ comparison vs Theta Z1) by 360Rumors
Many more can be found in the FB group.

…more will be added soon!

Thanks a lot to Andrew Dodd, Dean Zwikel, Ian Tresman, Michel Mendes, Michael Ty, Giorgio Marchetto, Fabian Ruyters, Jimmy Munro and many others for making this article possible!

Ausstellung dreihundertsechzig° @ Das Provisorium
Vernissage & Ausstellung dreihundertsechzig° @ Das Provisorium 1024 576 dreihundertsechzig

Vernissage & Ausstellung dreihundertsechzig° @ Das Provisorium

Andreas Tichon zeigt

dreihundertsechzig° – Die reale virtuelle Realität.

Echte Momentaufnahmen in 360°,
wie Du sie noch nie zuvor gesehen hast.

Kurz nach der Wiedereröffnung des Provisoriums in München startet die erste Ausstellung (sowohl nach der Wiedereröffnung als auch für den Künstler) “dreihundertsechzig°” mit einer Vernissage am Dienstag, den 19.09.2017 um 19:00 Uhr. Die Ausstellung ist daraufhin bis Samstag, den 23.09.2017 zu den regulären Öffnungszeiten des Provisoriums geöffnet.

Highlights aus mehr als einem Jahr der 360° Photo- und Videografie, Digital Art und Virtual Reality verschmelzen hier zu einem analog-digitalem Gesamterlebnis. Natur, Architektur, Light Painting Art oder gar Modelshootings werden durch die “Rundumsicht” so dargestellt, dass nichts verborgen bleibt und erzeugen einen Einblick, der bisher unmöglich schien.

Auf hochqualitativem FineArt-Papier, Aluminium, Acryl und Leinwand im 6-Farb-Digitaldruck erwachen diese zu neuem Leben und werden haptisch greifbar. Lasse Dich von den vielfältigen Möglichkeiten überraschen, die man bei der Dartstellung von 360° Inhalten hat und entdecke neue Welten.

Am Abend der Vernissage gibt es zudem die Möglichkeit, mittels Virtual Reality in die Exponate “einzutauchen”, Einblicke in den Entstehungsprozess zu erhalten und natürlich freut sich Andreas auf jedes Gespräch!

Die Ausstellung wird am 19.09.2017 um 19:00 Uhr im Das Provisorium – Kunstbar und Lesesaal in der Lindwurmstraße 37 in München (MVV: Sendlinger Tor/Goetheplatz) eröffnet und geht bis Samstag, den 23.09.2017.

Virtual reality meets reality. 360° zum Anfassen.
dreihundertsechzig° – Die reale virtuelle Realität.

Die Ausstellung auf Facebook:
Die Vernissage auf Facebook:

Weitere Informationen
Google Maps – Das Provisorium:
Andreas Tichon / dreihundertsechzig:
Facebook: | Dreihundertsechzig
Instagram: | @dreihundertsechzig
Twitter: | @3hundert60
Hashtag: #dreihundertsechzig

(Foto: Das Provisorium – Kunstbar und Lesesaal)

Ein großer Dank geht an alle, die dies ermöglicht haben (direkt oder indirekt)!

Euer Andreas